UPL - Omnidirectional TLOF / FATO Light

Perimeter light for all surfaces configurable in multiple versions and installation modes. In the low-profile versions (S0 and S1) no installation wells are required (for the S0 version a small hole in the helideck is suficient for cable routing) and the power supply module is supplied separately to be integrated into the control panel (see PS-LED-UPL). Other versions come with power box, powered directly to 12/24 Vdc or 120/230 Vac (50/60 Hz).Electric connection (without junction boxes) is available on request.

ICAO compliant photometry and CAP437.ICAO compliant photometry and CAP437 Omnidirectional light configurable in multiple versions for easiest installation in concrete and metal heliports (height<25mm).

Innovative composite material for anti-corrosion features

Compliance: ENAC, ICAO, FAA, CAP437, DGAC/STAC, CAAP70, AVV

Produktdetails Bestelldaten Zubehör Galerie Downloads Angebot / Anfragen

Features

LOW-PROFILEUPL-CUR-S0-S

  • Ground height: < 2,5 cm
  • External LED driver module
  • Cable entry from below through small hole
  • Cable lenght: 5 m
  • Cable lenght: 5 m

 


SURFACE LOW-PROFILEUPL-CUR-S1-S

  • Ground height: < 2,5 cm
  • External LED driver module
  • Cable length: 5 m
  • Optionally, multiple lights directly connected

 


SURFACEUPL-SSS-S2-S

  • Ground height: < 10 cm
  • Multiple lights chain connection available (power supply cable not included)
  • Inte
  • Internal VAC or VDC supplie

 


ELEVATED FRAMEUPL-SSS-R1-S (-E

  • Ground height: < 15 cm
  • Cable lenght: 5 m
  • Internal VAC or VDC supply

 


BUILT-IN FRAMEUPL-SSS-R1-S (-R

  • Ground height: < 2 cm
  • Cable lenght: 5 m
  • Internal VAC or VDC supplier

 


Produktdetails

Power Supply unit

Power supply unit for UPL lights, available in different versions depending onthe number of lines to supply and on the number of lights for each line. The power suppliers are mounted on an aluminum plate, dim. 318 x 130 x 41 (h) mm, equipped with terminal blocks for wiring and installation holes. This allows to easily integrate it into the unit in the control panel

TECHNICAL CHARACTERISTICS:

  • Power suppliers for LED lights (EN61347-1, EN61347-2-13, EN61000-3-2, EN61000-3-3, EN61000-4-5)
  • Dimensions: 318x130x41(h) mm (max 1,5 kg)
  • Power supply: 90-305 Vac 50/60Hz
  • Dimmable output for control of light intensity
  • Consumption: 1 line of lights (max 75W) or
    Consumption: 1 line of lights (max 75W) or 2 lines of lights (max 2 x 75W)
    Operating temperature: -30 / + 50°C
    Prepared with fixing holes for installation in the control pane

Galerie

Downloads